Header
  

 
 
 
  
 
 
Equipment - Processing - Hot Plates & UV Curers.

Hot Plates

PI-KEM is exclusive European distributor for Specialty Coating Systems, Inc USA and Chemat Technology, Inc USA. We are pleased to offer a range of two precision electronic hot plates. Specifications are listed below. For more information, please contact us.

Model 1000-1

Specifications: hotplate

  • Temperature range 50 - 150 C
  • Accurate to +/- 1% across working surface
  • Vacuum ports ensure intimate contact between substrate and hotplate
  • Substrate sizes from 10mm to 150mm
  • PID temperature controller with digital readout
  • 110 or 240V AC at 2 amps.
  • Requires vacuum >15"

KW-4AH

Specifications:

  • Temperature range 50 - 350 Ckw4ah
  • Resolution 1 C
  • Substrate sizes to 150mm (6")
  • Programmable temperature controller with digital readout
  • 240V AC


UV Curing Systems

PI-KEM is exclusive European distributor for Specialty Coating Systems, Inc USA and Chemat Technology, Inc USA.
We are pleased to offer a range of two UV cure systems for curing conformal coatings, adhesives, solder masks, etch resists, inks and other UV cure materials to suit most applications and budgets. Specifications are listed below. For more information, please contact us.

 

 

SCS-5106

Specifications:5106

  • UV source - 8 inch arc full spectrum mercury lamp, 6 inch full cure width.
  • UV flux - 860W/ft2 / 945mW/cm2.
  • UV spectrum 189 - 400nm (at full power).
  • Conveyor - Speed 5-50ft/min (12.7 - 127cm/min) left-to-right motion.
  • Power - 240V AC, 3KW, single phase, 50/60Hz.
  • Exhaust - 500 cfm (42m3/hr)
   

KW-4AC

Specifications:kw4ac

  • UV source - 4 x 4 watt G4T5 tubes.
  • UV wavelength - 254nm.
  • 6 rpm turntable.
  • Max substrate size 6" x 6" x 1" (150mm x 150mm x 25mm).
  • 220V / 50Hz