Tools for mixing and dispensing Aremco ceramic and epoxy-based adhesives, coatings and potting compounds.
TOOLS FOR ONE-COMPONENT CERAMIC SYSTEMS
Syringe and cartridge-style systems can be used with Aremco’s ceramic and ceramic-metallic high-temperature systems.
Two standard 30cc syringes are offered, one for manual use, the other for use with a mechanical dispense gun.
A standard 6 oz. (173cc) high density polyethylene cartridge with 1/4 NPT female threads is also offered. Manual and pneumatic hand guns, and plastic and stainless steel needles are also provided.
All metal and plastic components are easily reused since Aremco’s ceramic and ceramic-metallic products are water-based.
Standard 50ml cartridges and accessories for 1:1 mix ratio systems are available.
SYRINGE OPTIONS
8100 - Squeeze Bottle, 9 oz.
8200 - 30cc Mechanical Syringe Gun
8201 - 30cc Barrel, Plunger and Tip Cap Kit
8202 - 30cc End Cap
CARTRIDGE OPTIONS
8500 - Manual Hand Gun
8510 - Pneumatic Hand Gun
8515 - 6 oz. Cartridge
8516 - Plunger
8517 - Rear Cap
8518- Tip Cap
8525- Plastic Nozzles, 1/4 NPT, 1/16” Orifice, 4.0” Long
8530- Plastic Nozzles, 1/4 NPT, 1/8” Orifice, 4.0” Long
8535- Stainless Steel Needles, 1/4 NPT x 2.5”, 8 Gauge
8540- Stainless Steel Needles, 1/4 NPT x 2.5”, 10 Gauge
8545- Stainless Steel Needles, 1/4 NPT x 2.5”, 12 Gauge
8550 - Stainless Steel Needles, 1/4 NPT x 2.5”, 14 Gauge
TOOLS FOR TWO-COMPONENT EPOXY SYSTEMS
A standard 50ml dual barrel cartridge is offered for Aremco’s High Performance 1:1 Epoxy Systems. Most 1:1 products described in Technical Bulletins A7 and A8 are offered in pre-packaged 50ml cartridges. Part numbers for dispense guns, nozzles and needles are provided below.
9700 - Mechanical Dispense Gun
9850 - Hand-Held Plunger
9900 - Un-Filled Dual Barrel Cartridge (25ml/barrel) including (2) Pistons and Tip Cap
9905 - Static Mixing Nozzle, 3.5”
9910 - Static Mixing Nozzle, 6.0”
9920 - Mixer-Needle Adapter
9921 - Needle, .063” ID x 1/2” L
9922 - Needle, .047” ID x 1/2” L
9923- Needle, .033” ID x 1/2” L
9924 - Needle, .023” ID x 1/2” L
9925 - Needle, .016” ID x 1/2” L
9926 - Needle, .010” ID x 1/2” L
MIXER
7000 - Pneumatic Mixer for pints, quarts and gallons.
If you wish to discuss Aremco products please contact us at sales@pi-kem.co.uk or call us on 01827 259250
* All information stated in the brochure is correct at time of issue and subject to change without notice.