Electrically and thermally conductive materials which provide solutions to a variety of electrical, electronic and thermal design problems throughout industry.
Electrically and Thermally Conductive Adhesives and Coatings
|
Product |
Features |
|
Aremco-Bond™ 525-N |
Silver-Filled, Electrically & Thermally Conductive, Heat Cured, One-Part Epoxy Paste to 340 °F. |
|
Aremco-Bond™ 556 |
Silver-Filled, Electrically & Thermally Conductive, Two-Part Epoxy Paste to 340 °F. |
|
Aremco-Bond™ 556-LV |
Silver-Filled, Electrically & Thermally Conductive, Low Viscosity Two-Part Epoxy Paste to 340 °F. |
|
Aremco-Bond™ 556-HT-SP |
Silver-Filled, Electrically & Thermally Conductive, Screen Printable, Two-Part Epoxy Paste to 445 °F. |
|
Aremco-Bond™ 556-HT-HC |
Silver-Filled, Highly Conductive, Two-Part Epoxy Paste to 390 °F. |
|
Aremco-Bond™ 556-HT-UHC |
Silver-Filled, Highly Conductive, Two-Part Epoxy Paste to 390 °F. |
|
Aremco-Bond™ 614 |
Nickel-Filled, Electrically & Thermally Conductive, Economical, Two-Part Epoxy to 360 °F. |
|
Aremco-Bond™ 616 |
Silver-Filled, Electrically & Thermally Conductive, Economical, Two-Part Epoxy to 360 °F. |
|
Pyro-Duct™ 597-A (Adhesive) |
Silver-Filled, Electrically & Thermally Conductive, One-Part Systems to 1700 °F. |
|
Pyro-Duct™ 598-A (Adhesive) |
Nickel-Filled, Electrically & Thermally Conductive, One-Part Systems to 1000 °F. |
Thermally Conductive Adhesives
|
Aremco-Bond™ 568 |
Thermally Conductive, Aluminium-Filled, 1:1 Two-Part Epoxy to 400 °F. |
|
Aremco-Bond™ 805 |
Thermally Conductive, Aluminium-Filled, Two-Part Epoxy to 570 °F. |
|
Aremco-Bond™ 860 |
Thermally Conductive, Aluminium Nitride Filled, 1:1 Two-Part Epoxy to 400 °F. |
If you wish to discuss Aremco products please contact us at sales@pi-kem.co.uk or call us on 01827 259250
* All information stated in the brochure is correct at time of issue and subject to change without notice.