+44 (0) 1827 259250
0 Items £0.00

High Temperature Potting and Casting Materials

Aremco High Temperature Adhesives

High Temperature Potting and casting materials

Ceramic-based materials, used for the assembly of high temperature, high power electrical devices as well as high temperature fixtures, molds and tooling.

Materials based on aluminum oxide, aluminum nitride, magnesium oxide, silicon dioxide, silicon carbide, zirconium oxide, and zirconium silicate offer unique properties with respect to operating temperature, thermal conductivity, dielectric and mechanical strength.

Ceramacast™ products are supplied in either one- or two-part systems.

One Part Systems

Are typically mixed with water or a specialty binder system that is used to improve moisture resistance. Materials set at room temperature in several hours, then cure at ~250 °F in 2-4 hours to provide optimal electrical and mechanical properties.

Two Part Systems

Have varying set times and are similiarly cured at 250 °F in 1-2 hours.


  • Electrical
  • Ballast Resistors
  • Cartridge Heaters
  • Case Resistors
  • Ceramic Fiber Heaters
  • Electrical Feed-Thrus
  • Gas Ignitors
  • Halogen Lamps
  • High Temp Air Filters
  • Infrared Heaters
  • PTC Devices
  • Rheostats
  • Temperature Sensors.


  • Brazing Fixtures
  • Crucibles
  • Encapsulating RF Coils
  • Furnace Carriers
  • Heating Element Holders
  • Induction Heating Tools
  • Molds for Powder Metallurgy
  • Rapid Prototype Molds
  • Sintering Boats
  • Standoffs
  • Welding Jigs

If you wish to discuss Aremco products please contact us at sales@pi-kem.co.uk or call us on 01827 259250

* All information stated in the brochure is correct at time of issue and subject to change without notice.

PI-KEM ONLINE STORE ©2020 Company Number: 04215228 | VAT:GB 572885985

Privacy Notice | Conditions of Use | Sitemap | Web design by Cocoonfxmedia Ltd