+44 (0) 1827 259250
Basket
0 Items £0.00

High Temperature Speciality Coatings & Sealants

High Temperature for Ceramics, Glass & Quartz

Type

Product

Features

Ceramic-Inorganic

845

 

Single part, waterborne, silicon-filled, phosphate-bonded, brown-black coating for glass and quartz to
2000 °F (1093 °C). Primarily used for marking ceramic parts and coating automotive headlamps, stadium lighting and quartz vessels for the semiconductor industry. Standard viscosity is 200-400 cP; a higher viscosity coating, 845-HV, in the range of 500-800 cP is available upon request. Additional colors below are offered.

845-BLK

845-BLU

845-GRY

845-GLT

845-GDK

845-SIL

845-WHT

Jet Black

Cobalt-Aluminate Blue

Light-Gray

Light-Green

Dark-Green

Silver

White

Glass

613

 

Glass-filled adhesive/sealer for use with porous ceramics and refractories to 1150 °F (620 °C).

617

 

Glass-filled adhesive/sealer for use with porous ceramics and refractories to 1500 °F (816 °C).

850

 

Glass-ceramic filled, white reflective coating for glass and quartz to 1500 °F (816 °C).

Silicone

LC4010-BT

 

Aluminum-filled coating for application over black top coated headlamps to 1020 °F (550 °C).

LC4010-GL

Aluminum-filled coating for application directly over uncoated headlamps to 1020 °F (550 °C).

LC4040-SG

 

White reflective coating for use on mercury vapor lamps and other high temperature glass and quartz components to 1200 °F (649 °C).

 

High Temperature for Thermal Spray Sealants

Product

Features

542

Single part, low viscosity, water-dispersed, aluminum phosphate solution for penetrating ultra fine thermal spray applications to 3000 ºF (1650 ºC)

503-VFG-C

Single part, alumina-filled, phosphate-bonded, abrasion and corrosion resistant sealer for thermal spray applications to 3000ºF (1650 ºC). Available in the following standard colours of White, Black, Blue, Red, Orange

CP2000

Single part, urethane-based, gloss black, low viscosity, room temperature curing, abrasion and corrosion resistant sealer for applications to 400 ºF (204 ºC)

CP2070

Two part, novolac-epoxy with exceptional abrasion and corrosion resistance for continuous operations to 300 ºF (150 ºC) and intermittent use to 400 ºF (204 ºC)

CP4010

Single part, silicone-based, low viscosity, heat-curable, aluminum-filled sealer offering exceptional moisture resistance to 1100 ºF (593 ºC)

 

 

High Temperature Electrical Coatings & Sealants

Ceramic-Inorganic

 

512-N

Viscous, off-white, electrical insulation paste for circuit breakers, power resistors and solenoids to 1316ºC

538-N

Low viscosity, light gray, electrical insulation coating for high power resistors and rheostats to 1316ºC. Black and green pigments also available

Silicone

 

529

Transparent silicone sealer with exceptional electrical and moisture resistance to 427ºC. High viscosity (HV) and very high viscosity (VHV) versions available

Silicone-Ceramic

 

4030

Translucent-white, low-viscosity sealer for porous materials to 482ºC

CP4040

Low viscosity, white, electrical insulation coating for motor windings to 593ºC

CP4050

Low viscosity, green, electrical insulation coating for power resistors to 593ºC

Silicone-Glass

 

SGC4000

Silicone-glass-ceramic, gray, low viscosity, scratch resistant coating 482ºC

SGC4000-HT

Silicone-glass-ceramic, gray, low viscosity, scratch resistant coating 760ºC

Glass

GC4000

Glass-enamel, gloss-black coating for stainless steel to 538ºC

 

High Temperature High Emissivity Coatings

Aremco’s HiE-Coat™ 840-Series line of high emissivity coatings are black-body formulations designed to significantly improve the thermal efficiency of infrared heaters, furnaces, incinerators, and ovens used throughout the appliance, ceramics, chemical processing, metallurgical and refining industries. Natural gas and oil savings in the range of 5–10% are typical using these coatings.

Products

Features

840-C

Ceramic-based, black-pigmented coating for ceramic fiber modules, light-weight refractory board, and dense refractories to 2000 ºF (1093 ºC).

840-CX

Ceramic-based, black-pigmented coating for ceramic fiber modules, light-weight refractory board, and dense refractories to 2400 ºF (1316 ºC).

840-CM

Ceramic-based, black-pigmented coating for dense refractories and refractory metals to 2000 ºF (1093 ºC).

840-M

Ceramic-based, black pigmented coating for carbon and stainless steel to 2000 ºF (1093 ºC).

840-MX

Ceramic-based, black pigmented coating for carbon and stainless steel to 2400 ºF (1316 ºC).

840-MS

Silicone-Ceramic, black pigmented coating for aluminium, copper, carbon and stainless steel to 1100 ºF (593 ºC)

HiE-Coat™ Spectral Emissivity Charts

840-C 300 ºC, 840-CM 300 ºC, 840-M 300 ºC, 840-MS 300 ºC, 840-C 400 ºC, 840-CM 400 ºC, 840-M 400 ºC, 840-MS 400 ºC, 840-C 500 ºC, 840-CM 500 ºC, 840-M 500 ºC, 840-MS 500 ºC, 840-C 600 ºC, 840-CM 600 ºC, 840-M 600 ºC, 840-C 700 ºC, 840-CM 700 ºC, 840-M 700 ºC, 840-C 800 ºC, 840-CM 800 ºC, 840-M 800 ºC, 840-C 900 ºC, 840-CM, 900 ºC

 

High Temperature Refractory Coatings

Product

Features

Graphi-Coat™ 623

This patented coating is a two-part, silica-bonded, titanium diboride filled, oxidation resistant coating for protecting graphite crucibles, electrodes, and heat-treating fixtures to 2000 ºF (1093 ºC).

Pyro-Paint™ 634-AL

This high purity alumina, two-part coating seals alumina fiberboards and shapes to fill porosity and resist molten metals to 3200 ºF
(1760 ºC). Increases heat reflectivity to improve furnace efficiency by reducing ramp up times.

Pyro-Paint™ 634-ALP

This phosphate-bonded, single-part alumina coating bonds exceptionally well to dense refractories, providing high abrasion and corrosion resistance for operating temperatures to 3200 ºF (1760 ºC).

Pyro-Paint™ 634-AS,

Pyro-Paint™ 634-AS1

These alumina-silica, single-part coatings increase the durability of refractory fiberboards by sealing the substrate to minimize dusting and resist wetting by non-ferrous metals to 2300 ºF (1260 ºC).

Pyro-Paint™ 634-BN,

Pyro-Paint™ 634-BNSC

These lubricious, boron nitride, single-part coatings are used to seal refractory fiberboards and metals from wetting by nonferrous metals, salts, glasses and plastics. Select 634-BN for hard-coat and 634-BNSC for a more consumable soft-coat.

Pyro-Paint™ 634-GR

This single-part graphite coating improves parting of aluminium permanent molds, non-sticking in glass forming, and lubrication and stop-off in metalworking and wire drawing. Provides superior release, surface finish and mold protection.

Pyro-Paint™ 634-SIC

This single-part, silicon carbide coating improves the oxidation resistance of graphite crucibles, electrodes, and heat-treating fixtures to 2550 ºF (1400 ºC).

Pyro-Paint™ 634-YO

This single-part, yttrium oxide coating protects graphite, ceramic and metals, exposed to reactive metals such as titanium, uranium and their alloys under inert or vacuum atmospheres to 2732 ºF (1500 ºC).

Pyro-Paint™ 634-ZO

This single-part, zirconium oxide coating produces a hard, oxidation resistant coating on carbon and stainless steel and a range of refractory metals including molybdenum, platinum, rhodium, and titanium to 3270 ºF (1800 ºC). Good for sealing porous refractories and protecting resistance heating elements from oxidation and residue buildup that causes arcing and reduced element life.

 

 

Ultra High Temperature Ceramic Coatings

Aremco’s Corr-Paint™ CP3015-xx series coatings are silicate-bonded, ceramic and/or metal-filled, aqueous-based systems that provide excellent resistance to thermal shock, oxidation and chemical corrosion, with good colour stability for applications as high as 1500 °F (816 °C).  These coatings are single-part, fast curing systems that adhere well to carbon and stainless steels, ceramics and refractories. Mainly recommended for interior system protection, several standard colours are provided and custom colours are available upon request.

Product

Features

CP3015-AL

Aluminum-ceramic filled coating to 1200 °F

CP3015-BL

High emissivity, inorganic, black-pigmented coating to 1500 °F

CP3015-GR

Gray-ceramic inorganic coating to 1400 °F

CP3015-SS

Stainless steel filled, inorganic coating to 1400 °F

CP3015-WH

White-ceramic inorganic coating to 1500 °F

 

If you wish to discuss Aremco products please contact us at sales@pi-kem.co.uk or call us on 01827 259250

* All information stated in the brochure is correct at time of issue and subject to change without notice.

PI-KEM ONLINE STORE ©2020 Company Number: 04215228 | VAT:GB 572885985

Privacy Notice | Conditions of Use | Sitemap | Web design by Cocoonfxmedia Ltd